Advenser offers full-service solutions for all your MEP Building Information Modeling (BIM) requirements. We place ourselves before the AEC industry as a conversant workforce of MEP/HVAC engineers with a combined experience of over 150 years and ample experience in providing MEP BIM services to various sectors which include educational institutions, healthcare, plants, residential, commercial and industrial buildings.
Driven by the extensive experience gained from our association with HVAC/ MEP consultants, contractors, fabricators and manufacturers around the globe for the past decade, we provide
MEP/HVAC BIM services of impeccable quality while strictly adhering to the international industrial standards set by ASHRAE, SMACNA, NFPA and IEEE.


Our capabilities as an MEP BIM service provider

Over the past decade, we have showcased our capability to provide MEP /HVAC BIM modeling and drafting services of the highest standards by working on a plethora of MEP/HVAC projects spread across the globe. Our team of professional MEP modelers can develop intelligent BIM models with a focus on facilitating.

  • Coordination
  • Fabrication
  • Optimization
  • Installation

We mainly focus on combining the data from the architectural, structural and MEP design drawings using MEP BIM software packages like Autodesk Revit and NavisWorks to

  • Develop data rich MEP BIM models of the various MEP systems
  • Carry out the coordination tasks
  • Develop 2D drawings
  • Perform quantity takeoffs
  • Develop 4D models

Our MEP BIM modeling and drafting services

MEP BIM modeling
MEP BIM 3d modeling
  • Mechanical Equipment Modeling
  • Diffusers and Grills Modeling
  • 3D modeling and rendering for MEP layout
  • Electrical Lighting Fixtures
  • Layout Modeling
  • Plumbing Layout modeling
  • Sanitary Fixture Revit Models
  • Mechanical Duct and Duct Fittings Modeling
  • Walk-Through of MEP / BIM Models
  • Rendered views of Mechanical BIM Models
  • Parametric modeling

Our Mechanical drafting / CAD modeling services

  • Shop/ Fabrication drawings
  • Reverse Engineering
  • Shop/ Fabrication drawings
  • Duct layout drawings
  • CAD conversion
  • 2D drafting and detailing of Mechanical components
  • Mechanical Equipment Detailing (sections and isometric)

Our Electrical drafting / CAD modeling services

  • Electrical site plans
  • Electrical one line diagrams (Riser diagrams)
  • Electrical schematics
  • Solar panel detailing
  • Electrical, power and lighting plans

Our Plumbing drafting / CAD modeling services

  • Equipment schedule
  • Natural and LP gas piping drafting services
  • Compressed air and medical gas system plan drawings
  • Demolition and existing plan drawings
  • Drafting services for domestic water plumbing
  • Shop drawings, As-builts, specifications and coordination
  • Plumbing and drainage drafting services
  • Locate and coordinate pipe sleeve requirements
  • Isometrics, Riser diagrams, details, schematics and schedules
  • Sleeve / Penetration Drawings

Our HVAC modeling/ drafting services

  • Equipment piping sizing and design layout plan drawings
  • Drafting services for HVAC system construction plan drawings
  • Details, schematics, schedules, legends and control diagrams
  • As-built drawings, equipment specifications, coordination drawings, shop drawings and addendums
  • Mechanical equipment layouts, submittals and elevation drawings


  • Boilers
  • Radiant heat
  • Direct vent heating
  • Space heaters
  • Indoor coil systems
  • Heat pumps
  • Wall and floor Furnaces
  • Forced hot air/ water
  • Thermostats
  • Natural gas heating
  • Heat pumps – Standard and ground source


  • Overhead Units
  • Ductless split systems
  • Sheet metal ducts
  • Humidifiers / Dehumidifiers
  • Central air systems
  • Window/ Rooftop unit systems
  • Air cleaners and filters


  • Air conditioners
  • Air conditioner
  • Air handlers

Our quality assurance

With a highly motivated and quality oriented workforce, Advenser is known among the AEC industry as an avowed destination for accurate MEP BIM modeling/drafting. We have a dedicated team of 13 quality analysts spearheaded by project managers with 7+ years of industrial experience. The team is responsible for carrying out the quality analysis based on

  • Adherence to the internationally accepted industrial standards and building codes
  • The accuracy of the model/drawing
  • Whether the client requirements are met or not

We follow the following international standards

  • IECC – International Energy Conservation Code
  • ASHRAE standards – The American Society of Heating, Refrigerating and Air Conditioning Engineers standards
  • NFPA codes – National Fire Protection Association codes
  • AS 1668.2 – Australian Standards for The use of mechanical ventilation and air conditioning in buildings
  • AS1851-2005 – Australian Standards for Maintenance of fire protection systems and equipment
  • AS/NZS 3666 – Joint Australian New Zealand Standard
  • NBN standards – S21-200, S21-201, S21-202, S21-203, N S21-207

    Our Software expertise

    Our team of MEP/HVAC engineers and draftsmen are proficient in

    • AutoCAD MEP
    • Autodesk FABmep
    • Cadduct
    • CadPipe
    • Autodesk Inventor
    • Revit MEP

    Top reasons to hire Advenser

    • 10+ years of experience in BIM services
    • Impeccable quality of deliverables
    • Competitive prices
    • Quick turnaround time
    • Workforce of MEP/HVAC engineers with 8+ years of experience
    • Highly conversant with the modern software packages and drafting/modeling practices

    check our Samples.

    Contact us Now.

    Check our samples.

    Contact us Now.