You can make grids and grid lines act magnetically so that the objects on the grid lines follow if you move the grid line. To bind objects to grid lines, select the Magnetic grid plane checkbox. In the Extension for magnetic area field, enter a distance from the grid...
As the System Classification is greyed out by default, direct switching is not possible. Two methods are demonstrated here. Method 1 Disconnect the pipes from the fitting Reconnect by stretching it back to the fitting You can also use “Trim ” command for...
1. Note a family in the linked project that has the shared parameter you are hoping to schedule. 2. Close the linked file. 3. Open a new test project into which the previously opened Revit file has to be linked 4. Link the previously opened project 5. Find a view and...
Since the System Classification will normally be greyed out, switching directly is not possible. You can try one of the two possible ways to switch to the correct system classification: Method 1 a. Disconnect the pipe from the pipe fitting which belongs to a different...
The first part is to generate view filters for the family whose visual appearance needs to be customized. Find out the naming convention of the family. Select the required view type and go to Visibility Graphics using the ‘VG’ command to. Go to filters tab. You can...