Advenser has skilled and experienced rebar detailers at its disposal. They can cater to your every rebar detailing requirement.

Our rebar detailers are well accustomed with working on all types of structures using the specified international standard. 

REBAR SIZES

U.S. Imperial sizes: Imperial bar designations represent the bar diameter in fractions of 1⁄8 inch, such that #8 = 8⁄8 inch = 1 inch diameter. Area = (bar size/9)² such that area of #8 = (8/9)² = 0.79 in². This applies to #8 bars and smaller. Bars higher in number have a slightly larger diameter than the one computed using the 1⁄8 inch formula.

Canadian metric sizes: Metric bar designations represent the nominal bar diameter in millimeters, rounded to the nearest 5 mm.

European metric sizes: Metric bar designations represent the nominal bar diameter in millimeters. Bars in Europe will be specified to comply with the standard EN 10080, although various national standards still remain in force.

GRADES

Rebar is available in different grades and specifications that vary in yield strength, ultimate tensile strength, chemical composition, and percentage of elongation.

The grade designation is equal to the minimum yield strength of the bar in ksi (1000 psi). For instance grade 60 rebar has a minimum yield strength of 60 ksi. Rebar is typically manufactured in grades of 40, 60, and 75.

Common specifications are:

« ASTM A 615 Deformed and plain carbon-steel bars for concrete reinforcement
« ASTM A 706 Low-alloy steel deformed and plain bars for concrete reinforcement
« ASTM A 955 Deformed and plain stainless-steel bars for concrete reinforcement
« ASTM A 996 Rail-steel and axle-steel deformed bars for concrete reinforcement

Historically in Europe, rebar comprised mild steel material with a yield strength of approximately 250 N/mm². Modern rebar comprises high-yield steel, with a yield strength more typically 500 N/mm². Rebar can be supplied with various grades of ductility, with the more ductile steel capable of absorbing considerably greater energy when deformed - this can be of use in design to resist the forces from earthquakes for example.

Expertise in CAD or expertise in structural engineering is not enough for rebar detailing. It’s a perfect combination of the two with thorough knowledge in preparing detailed drawings as per global standards. Rebar detailers of Advenser are a perfect combination, who can offer you rebar detailing as per global standards.